Tec-Kote™ 1010 is a next-generation solvent-based finish coating engineered to replace traditional low-friction coatings that are becoming less available and no longer meet evolving PFAS regulatory requirements. Combining high durability, low coefficient of friction, and excellent chemical resistance., Tec-Kote™ 1010 provides a reliable solution for industrial, automotive, and medical-related applications.
Tec-Kote™ 1010 is a solvent-based finish coating that can be applied by spray, roll coat, dip-spin, or dip-drain processes. Once cured, it forms a durable coating that adheres to most metals while providing low friction, high durability, excellent adhesion, low particle generation, and strong heat and solvent resistance.
Developed to address increasing industry demand for PFAS-compliant alternatives, Tec-Kote™ 1010 complies with the EU Commission Delegated Regulation of PFOA and EU Regulations 2020/784 and 2021/1297 onC9-C14. It is also designated as PFAS/PFOA Regulatory Compliant (RC).
For customers requiring coated components rather than coating materials, Tectorius also offers application services for low-volume and specialized parts using its dip-spin process.
Application Methods: Spray,roll coat, dip-spin, dip-drain
Solids, Theoretical: 35.8% by wt. / 25.6% by vol.
Density, Theoretical: 8.6lb./gal / 1.03 kg/liter
Viscosity, as Shipped: 25–35 sec Zahn 3 cup at 77°F (25°C)
Cure Temperature: 392°–500°F (200°–260°C)
Film Thickness: 0.0008"–0.002"
Use Temperature Range:-100°F to 500°F max (-73°C to 260°C)
Coefficient of Friction (ASTMD1894): 0.15–0.35 static
Tensile Strength (ASTM D1708):4,000–5,000 psi
Hardness (ASTM D2240):60–90 Shore D
Impact Strength (ASTM D256):13 ft-lb/in
Abrasion Resistance (Tabor):>15 mg
Water Absorption (ASTM D570): 0.03%
Dielectric Strength (ASTMD149): 1,400 volts per mil
Chemical Resistance: Excellent
Standard Color: Satin black; additional colors available upon request
Regulatory Compliance: PFAS/PFOA Regulatory Compliant (RC); EU 2020/784 and 2021/1297 (C9-C14)
PFAS-Compliant Replacement for Legacy Coatings: Tec-Kote™ 1010 was developed specifically to address the regulatory and supply constraints affecting traditional fluoropolymer coatings. It meets current PFAS/PFOA standards while delivering equivalent or superior performance in friction, durability, and chemical resistance.
Low Friction Across a Wide Operating Range: With a static coefficient of friction of 0.15–0.35 (ASTM D1894) and a service range from -100°F to 500°F, Tec-Kote™ 1010 maintains consistent performance in thermally and mechanically demanding environments.
High Durability and Wear Resistance: Shore D hardness of 60–90, Tabor abrasion resistance greater than 15 mg loss, and an impact strength of 13 ft-lb/in make Tec-Kote™ 1010 suitable for components subject to repeated mechanical stress and surface contact.
Broad Chemical and Solvent Resistance: Tec-Kote™ 1010is rated for excellent chemical resistance, protecting coated surfaces from exposure to industrial solvents, process fluids, and corrosive environments.
Application Services Available: For customers requiring direct part coating, Tectorius offers dip-spin application services for low-volume and specialized parts, providing a consistent, process-controlled alternative to in-house coating operations.
What makes Tec-Kote™ 1010 different from traditional low-friction coatings?
Tec-Kote™ 1010 is engineered to replace legacy fluoropolymer-based coatings that are increasingly restricted under PFAS regulations or unavailable from traditional sources. It delivers comparable low-friction and durability performance while complying with current EU PFOA standards.
Which regulatory standards does Tec-Kote™ 1010 complywith?
Tec-Kote™ 1010 is PFAS/PFOA Regulatory Compliant (RC) and complies with EU Commission Delegated Regulation of PFOA under EU numbers 2020/784 and 2021/1297 on C9-C14.
What metals does Tec-Kote™ 1010 adhere to?
Tec-Kote™ 1010 adheres to most metals. Adhesion performance on specific substrates or surface conditions should be confirmed with the Tectorius Technical Team prior to production use.
Can Tectorius apply Tec-Kote™ 1010 directly to our parts?
Yes. Tectorius offers dip-spin application services for low-volume and specialized parts. Contact Tectorius to discuss part geometry, volume requirements, and application suitability.
What application methods are supported?
Tec-Kote™ 1010 can be applied by spray, roll coat, dip-spin, or dip-drain processes. Most customer-supplied application equipment compatible with solvent-based coatings is suitable.
.png)
.svg)
